Repairs & Maintenance
Smoke Alarms in Strata Apartments: Who Installs, Tests and Pays, State by State
The alarm on your bedroom ceiling and the detectors wired to the building's fire panel are different things with different owners. This is who installs, tests, repairs and pays for smoke alarms in a strata apartment, what landlords can't hand to tenants, and the rule in every state and territory.
By Buddy · · 13 min read

On this pageThe owner briefingOn this page
- The owner briefing
- Quick answers
- Who is responsible for smoke alarms in a strata apartment?
- Is the landlord or the body corporate responsible for smoke alarms in a rented unit?
- How often should smoke alarms be tested in an apartment?
- Do smoke alarms in apartments have to be interconnected?
- Who pays for a false alarm call-out?
- Two different things on your ceiling
- Who owns the alarm inside your lot
- Landlords: the duty you can't hand to the tenant
- NSW
- Other states
- Battery or hardwired
- Getting into lots to test
- State by state
- Owner and landlord checklist
- Committee checklist
- A testing log template
- How UnitBuddy fits
- Related reading
- Sources and further reading
The owner briefing
- There are two systems on most apartment ceilings: a domestic smoke alarm that belongs to the dwelling, and building fire detection that belongs to the scheme. Work out which one you have before you argue about who pays.
- Smoke alarm laws mostly put the duty on the owner of the dwelling, and on the landlord when it's rented. Strata law decides who owns the alarm itself, through your plan, your by-laws and the building's fire safety schedule.
- If you rent out your lot, the duty stays with you. In most states you can't pass testing or repairs to the tenant, and in NSW the owners corporation only takes it over if strict conditions are met.
A tenant reports a chirping alarm. The agent says call strata. The manager says it's a lot item. The owner says the building installed it, so the building can fix it. A week later the alarm is still chirping, or someone has pulled the battery out.
The confusion is understandable. The alarm sits on a ceiling that may be common property, it may be wired into a panel the owners corporation services, and your state's smoke alarm law may not mention strata at all. This guide pulls the pieces apart.
Quick answers
Who is responsible for smoke alarms in a strata apartment?
It depends on which alarm you mean. Detection on common property, and detectors wired to the building's fire indicator panel, are the scheme's to maintain. In NSW that duty sits in s 106 of the Strata Schemes Management Act 2015. A standalone alarm inside your lot is usually yours. Your state's smoke alarm law then decides what you must do with it, and that law mostly points at the owner of the dwelling. In South Australia the regulations say so outright: the unit holder is treated as the owner (reg 95). Check your plan, by-laws and fire safety schedule for the exceptions.
Is the landlord or the body corporate responsible for smoke alarms in a rented unit?
The landlord, in almost every case. In NSW, s 64A of the Residential Tenancies Act 2010 makes keeping alarms working the landlord's job. The owners corporation takes over only if the conditions in cl 21 of the Residential Tenancies Regulation 2019 are met. Victoria, Queensland, WA, Tasmania, the ACT and the NT all put rental duties on the landlord too.
How often should smoke alarms be tested in an apartment?
At least once a year in most rental rules. NSW landlords must check alarms yearly. Victorian rental providers must test at least every 12 months. In Queensland the tenant tests and cleans at least every 12 months, and the lessor tests within 30 days before each tenancy starts (s 148B of the Fire Services Act 1990). For your own home, follow the maker's instructions. Pressing the test button takes ten seconds.
Do smoke alarms in apartments have to be interconnected?
In Queensland, yes. Every dwelling must have interconnected photoelectric alarms from 1 January 2027, and the Queensland guide covers that in detail. Elsewhere, interconnection is mostly a rule for new homes and major work under the building code. South Australia, for example, requires it for new dwellings, additions and extensions. Interconnection means within your dwelling, not across the whole building.
Who pays for a false alarm call-out?
Usually not you. A standalone alarm inside a lot just sounds. Detectors wired to a panel that calls the brigade are another matter. Fire and Rescue NSW can charge for attending false alarm call-outs to automatic fire alarm systems, and the NSW Government consulted on changing those charges in late 2025. I couldn't confirm the current amount. Whether the scheme can pass the charge on to the owner whose toast caused it depends on your by-laws.
Two different things on your ceiling
A domestic smoke alarm is a self-contained unit made to Australian Standard AS 3786. It may run on a battery or on 240 volts with a backup battery. It sounds inside your dwelling and nowhere else. This is the alarm most state smoke alarm laws are talking about.
Building fire detection is a system of detectors wired to a fire indicator panel. Larger apartment buildings often have it in corridors, stairs, car parks and plant rooms, and sometimes inside every lot. It's an essential fire safety measure. In NSW it's listed on the fire safety schedule, serviced to AS 1851 and certified each year in the annual fire safety statement. The AS 1851 guide and why AFSS reports don't match cover that side.
Some buildings have both in the same lot: a panel detector in the hallway and a domestic alarm in the bedroom. Treat them as two items with two owners until your documents say otherwise.
Queensland's Act recognises the overlap. An owner of a unit in a Class 2 building complies with the domestic alarm rules if a smoke detection system meeting the Building Code is installed (s 148 of the Fire Services Act 1990). Other states don't say it as plainly. The practical point is the same everywhere: if your in-lot detectors are part of the building system, don't swap them for a hardware-store alarm. You could disable part of the building's protection, and in NSW council guidance says it's an offence to remove or interfere with a required alarm except to repair or replace it.
Who owns the alarm inside your lot
No state Act I could find has a section that says "smoke alarms inside lots are common property" or "are lot property". The answer comes from your own scheme's documents. Read them in this order:
- The fire safety schedule (NSW) or the building's list of fire safety installations. If the alarms in the lots are on it, the scheme services them as part of the building system.
- The strata plan and any common property memorandum or by-law. Some schemes allocate smoke detectors expressly. Some memoranda mention smoke detectors in general terms, and owners and managers still argue about whether that covers a battery alarm inside a lot. Read the words, not the summary.
- Who installed it, and how. An alarm the developer installed and wired into the building's circuits is a different object from a battery alarm a past owner screwed to the ceiling.
If the alarm is common property, the scheme must keep it in repair. In NSW that duty is strict and sits in s 106. If it's lot property, it's yours. The common property guide explains how the line is drawn.
NSW tenancy law expects both set-ups. A tenancy agreement for a strata lot made from 23 March 2020 must say whether the owners corporation is responsible for repairing and replacing the smoke alarms. That only makes sense because in some buildings it is.
My view: a working smoke alarm is the cheapest life-safety item in the building. A committee that spends three meetings deciding whose battery it is has already lost. Decide the rule once, write it down, and tell every owner.
Landlords: the duty you can't hand to the tenant
Most of the detailed smoke alarm law in Australia is tenancy law.
NSW
NSW Fair Trading says a landlord must:
- keep smoke alarms in working order and can't pass that duty to the tenant (s 64A of the Residential Tenancies Act 2010)
- check alarms every year, and replace removable batteries every year and lithium batteries on the maker's schedule
- repair or replace a faulty alarm within 2 business days of finding out
- replace alarms within 10 years of manufacture, or sooner if the maker says so
- use a licensed electrician for hardwired alarms.
The detail sits in cll 13 to 21 of the Residential Tenancies Regulation 2019. If the landlord doesn't act in time, the tenant can sometimes arrange the work and be reimbursed.
The strata exemption. A landlord is exempt from s 64A only if all four conditions in cl 21 of the Regulation are met:
- The alarms are hardwired, or battery-operated with the owners corporation responsible for repairing and replacing them.
- The landlord has told the tenant in writing that the owners corporation is responsible.
- The landlord tells the owners corporation within 24 hours of learning a repair or replacement is needed.
- The landlord takes reasonable steps to make sure the work gets done.
Miss one, and the duty is yours again. "I emailed strata" is not a defence if you emailed on day four.
Other states
- Victoria. Rental providers must make sure alarms are correctly installed and working, and tested at least every 12 months (s 68AA of the Residential Tenancies Act 1997). A faulty alarm is an urgent repair. Consumer Affairs Victoria says annual smoke alarm safety checks became mandatory for all rental properties from 25 November 2025.
- Queensland. The lessor tests, cleans and replaces flat batteries within 30 days before each tenancy. The tenant tests and cleans at least every 12 months and reports faults (ss 148B to 148E of the Fire Services Act 1990). A tenant can't act as the lessor's agent for the lessor's duties (s 148H).
- WA. The owner must have compliant alarms before the dwelling is rented or hired, and the lessor must keep each alarm in working order (regs 58 and 62 of the Building Regulations 2012). "Dwelling" expressly includes a unit in a Class 2 building (reg 55).
- Tasmania. The owner must make sure alarms are in place for the whole tenancy, and the owner and tenant each have maintenance duties set by regulation (ss 36C and 36D of the Residential Tenancy Act 1997).
- ACT. A lessor must not sign a residential tenancy agreement unless compliant alarms are installed (s 11B of the Residential Tenancies Act 1997). The Regulation, s 1B, sets the standard and the locations.
- NT. NT Police, Fire and Emergency Services says a landlord must make sure a working photoelectric alarm is installed when a tenancy starts or is renewed, and the tenant keeps it in working order during the tenancy, under the Fire and Emergency Regulations.
Battery or hardwired
The power source changes who can touch the alarm.
- Hardwired (240 volt) alarms need a licensed electrician to replace or repair. NSW tenancy rules say so expressly, and Consumer Affairs Victoria says the same.
- Queensland requires like for like. A hardwired alarm must be replaced with a hardwired alarm (s 148A), and any alarm must be replaced within 10 years of manufacture or straight away if it fails a test.
- Victoria: Consumer Affairs Victoria says buildings constructed after 1 August 1997 must have hardwired alarms with battery backup. Older buildings may use battery alarms.
- South Australia: when title to a unit is transferred, the new owner has 6 months to have alarms that run on mains power or on a 10-year sealed, non-removable battery (reg 95(4)).
- WA: where mains power was required, the alarm must be permanently connected. A non-removable 10-year battery is allowed only where there's no wiring route or the council has approved it (regs 60 and 61).
Hardwired alarms often run through common property ceiling space. Ask the committee before the electrician cuts in. In Tasmania, the body corporate can't block the installation, repair or wiring of alarms required for a rental (s 36G of the Residential Tenancy Act 1997). Elsewhere, a short written approval avoids a by-law fight later.
Getting into lots to test
If the scheme maintains the alarms inside lots, it needs to get in, usually once a year. That's entry for the scheme's own work, and the normal notice rules apply. In NSW, entry outside an emergency needs the occupier's consent or an NCAT order (s 122 and s 124). Queensland requires at least 7 days' written notice (s 163 of the Body Corporate and Community Management Act 1997). The right of entry guide has every state.
Three things make the annual test day work:
- One day, one notice, every lot. Give the date, a time window and the contractor's name. Copy owners and rental agents.
- A recorded refusal. If an occupier won't let the tester in, record it against the lot and send a second date. Don't skip the lot quietly.
- Landlord coordination. NSW landlords have their own entry right for smoke alarms (cl 13 of the Regulation). Two testers in one lot a week apart means someone pays twice.
State by state
| State | Main smoke alarm law | Who it puts the duty on | Rentals |
|---|---|---|---|
| NSW | Part 13, EP&A (Development Certification and Fire Safety) Regulation 2021 | Owner of the dwelling or unit (council guidance); scheme for alarms that are common property under s 106 | Landlord under s 64A; yearly check, 2 business days to repair; strata exemption in cl 21 of the Regulation |
| VIC | Building Regulations 2018 | Owner. Consumer Affairs Victoria says all homes, including units and flats, must have alarms | Rental provider under s 68AA; test every 12 months; faults are urgent repairs |
| QLD | Fire Services Act 1990 | Owner installs and replaces (s 148A); interconnected photoelectric in every dwelling from 1 January 2027 | Lessor before each tenancy, tenant every 12 months (s 148B) |
| WA | Building Regulations 2012, regs 55 to 62 | Owner, before sale, rent or hire. I found no general duty to retrofit an owner-occupied unit | Lessor keeps alarms working (reg 62) |
| SA | PDI (General) Regulations 2017, reg 95 | Owner of every Class 1 and 2 dwelling; the unit holder is treated as the owner; max penalty $750 | sa.gov.au says landlords share the duty; check the Act |
| TAS | Residential Tenancy Act 1997, Part 3A | Owner of rented premises. I couldn't confirm a rule for existing owner-occupied units | Owner and tenant duties (ss 36C, 36D); body corporate can't block alarms (s 36G) |
| ACT | Residential Tenancies Act 1997, s 11B | Lessor. I couldn't confirm a retrofit rule for owner-occupied units | No lease without compliant alarms; standard and locations in s 1B of the Regulation |
| NT | Fire and Emergency Regulations | Owner; photoelectric required on sale, new tenancy or when the old alarm fails (NT PFES) | Landlord installs; tenant keeps it working |
A few notes on the table.
- NSW. Official sources disagree on the clause numbers within Part 13 of the Regulation, so read it before you quote one. I found nothing in the 2026 strata reforms that changes who owns in-lot alarms.
- South Australia is the clearest on strata. Regulation 95(6) treats a unit holder under the Strata Titles Act 1988, or a community lot owner, as the owner of the building that makes up the unit. The alarm duty is yours, not the corporation's.
- NT. I read the NT fire service's summary, not the regulation text. Check the Regulations before relying on the detail.
Owner and landlord checklist
Committee checklist
A testing log template
How UnitBuddy fits
Smoke alarm disputes are usually record problems. Nobody can find the fire safety schedule, the by-law that allocates the alarms, or last year's test results. UnitBuddy keeps those in one shared record for the building. The asset register can hold the scheme's alarms and detectors with their install dates. The committee's decision on who owns in-lot alarms sits next to the notice that told owners. Test logs, contractor reports and entry notices are stored against the building, so a new committee or manager starts with last year's results instead of a blank page.
Related reading
- Strata repairs and defects: who fixes what and who pays
- Queensland's 1 January 2027 smoke alarm deadline
- NSW fire safety rules changed in 2026: what strata committees must check now
- Fire inspections: why NSW strata AFSS reports don't always match
Sources and further reading
- NSW Government: smoke alarms in a rental property
- NSW: Residential Tenancies Regulation 2019
- NSW: Environmental Planning and Assessment (Development Certification and Fire Safety) Regulation 2021
- NSW Government: safety rules for strata common property
- Consumer Affairs Victoria: smoke alarms and fire safety
- Queensland: Fire Services Act 1990
- Queensland RTA: smoke alarms
- WA: Building Regulations 2012
- SA: Planning, Development and Infrastructure (General) Regulations 2017
- SA Government: smoke alarms
- Tasmania: Residential Tenancy Act 1997
- Tasmania Fire Service: smoke alarms in rentals
- ACT: Residential Tenancies Act 1997 and Residential Tenancies Regulation 1998
- NT Police, Fire and Emergency Services: smoke alarms
What changed in strata this month? Read the strata news for your state, with every figure sourced.
More guides like this

Guides
Strata Repairs and Defects in Australia: Who Fixes What and Who Pays (2026)
Leaks, waterproofing, mould, roofs, drains, glass, gates, fire safety and new-building defects: who has to fix each one, who pays, what to do first and how to make a slow owners corporation act. State-by-state, written for owners and committees.
19 November 2026 · 18 min read

Repairs & Maintenance
Pests and Termites in Strata: Who Pays for Cockroaches, Rats and Termites
Cockroaches in one flat, rats in the bin room, termites in the frame. Who pays depends on where the pests live, where they came from and what they damaged. Here is the split, state by state, with checklists and a pest report you can copy.
19 November 2026 · 13 min read

Repairs & Maintenance
Recurring Blocked Drains in Strata: When to Stop Clearing and Start Relining
Recurring blocked drains in strata? How committees can tell lot pipe from common property, read a CCTV report and decide when relining beats clearing.
12 November 2026 · 9 min read